is here! Shop now, pay later in 4 easy installments
Boots Size Chart
All of our boots are in US Men's sizing, however, please use measurement tape/ ruler to measure the length of your foot in Centimeter to get the best measurement, and convert to US sizings. We recommend to go 0.5cm or 1/2 size up from your Cm measurements to allow space and movement inside the boots.
| SIZE CHART - Flux Mid Boxing Boots | ||||
| US Men's | US Women's | UK Men | EUR | CM |
| 4,5 | 6 | 3,5 | 36,5 | 22,5 |
| 5 | 6,5 | 4 | 37 | 23 |
| 5,5 | 7 | 4,5 | 37,5 | 23,5 |
| 6 | 7,5 | 5 | 38 | 24 |
| 6,5 | 8 | 5,5 | 38,5 | 24,5 |
| 7 | 8,5 | 6 | 39 | 25 |
| 7,5 | 9 | 6,5 | 40 | 25,5 |
| 8 | 9,5 | 7 | 40,5 | 26 |
| 8,5 | 10 | 7,5 | 41 | 26,5 |
| 9 | 10,5 | 8 | 42 | 27 |
| 9,5 | 11 | 8,5 | 42,5 | 27,5 |
| 10 | 11,5 | 9 | 43 | 28 |
| 10,5 | 12 | 9,5 | 44 | 28,5 |
| 11 | 12,5 | 10 | 44,5 | 29 |
| 11,5 | 13 | 10,5 | 45 | 29,5 |
| 12 | 13,5 | 11 | 46 | 30 |
| 12,5 | 14 | 11,5 | 46,5 | 30,5 |
| 13 | 14,5 | 12 | 47 | 31 |
| 13,5 | 15 | 12,5 | 47,5 | 31,5 |
| 14 | 15,5 | 13 | 48 | 32 |
| 14,5 | 16 | 13,5 | 48,5 | 32,5 |
| *Sizing chart is an approximate guide - Results may vary. | ||||
If you aren’t still unsure with your sizing, please go 1/2 size up for looser fit.
YAMMY Boots Cleaning Guide.
- Preparation: Remove any excess dirt or debris from the boots by gently brushing them off with microfibre towel or soft brush.
- Spot Test: Before washing the entire boot, spot test a small, inconspicuous area with mild detergent to ensure it doesn't cause any damage or discoloration.
- Spot cleaning: Use only mild liquid detergent or spot treatment for any stain on the fabric. The lower part of the boots are made of TPU, so a warm, and damp microfibre towel can clean it easily.
- Preparation: Fill a bowl or a container with warm water and add a small amount of mild detergent and dilute them well before applying to a soft shoe brush/ toothbrush. Take off laces and insoles, they can be handwashed or scrubbed separately.
- Clean: Dip a soft brush or cloth into the soapy water and gently scrub the mesh and TPU.
- Rinse: Once cleaned, rinse the boots thoroughly with lukewarm running water or damp microfibre towel to remove any soap residue. Do not submerge the boots into a bucket of water. Squeeze excess water gently without twisting the boots.
- Air Dry: Allow the boots to air dry naturally under shade away from direct sunlight or heat sources. It is best to do this in a warm day not cloudy or in winter as you want the boots to dry as soon as possible. Stuff them with paper towels to help maintain their shape during drying. Spread the tongue of the boots out so there’s better surface for drying. Please lay the shoes flat not vertical on one side.
- Optional: If desired, you can apply a fabric protector spray specifically designed for mesh materials to help repel dirt and stains in the future. Spray deodoriser for shoes/ boots can also be used, make sure you do it outdoor or in well ventilated area.
- Recommended after workout care: Make sure to always dry your boots outdoor after each of your boxing sessions. Wet boots are home for bacteria and terrible for your foot health.
Remember, avoid putting your boots in the washing machine, using harsh chemicals or abrasive cleaning tools, as they can damage the materials of the boots. Do not keep them wet for a long time as it can damage the glue and cause peeling of the TPU. Please always wear socks when training to reduce sweat on the boots.
Flux Mid Boots Size Guide
FLUX MID BEIGE/CREAM
UPPER - LESS IS MORE
- The upper showcases a redesigned 2x reinforced high-quality welded TPU exo-skeleton, enhancing the strength of critical stress points. This design ensures maximum support and structural integrity while maintaining a flexible yet sturdy form that is exceptionally durable.
- The body of the Flux upper is made from a breathable herringbone mesh that has a high tensile and will hold its shape and perform for the trainer to the pro.
- The throat now includes enhanced reinforced hidden lace loops, ensuring their strength while achieving a sleek design that is both functional and appealing.
- The heel is completed with an engineered branding tape that doubles as a lacing centring device for ankle support.
MIDSOLE - COMFORT AND FORM
- The integrated midsole “neck” is featured on the inside of the upper which creates the footprint for the entire upper shape and outsole function. It’s made from premium EVA which cushions and supports the foot during heavy wear.
OUTSOLE - SPEED & PERFORMANCE
- Formed to pivot and move with speed
- The Flux Mid outsole is made with all new highly durable rubber compound featuring our signature split herringbone tread that will allow your foot to manoeuvre when you’re on the move or need to be grounded.
-
The rubber forefoot and heel is split by a TPU midfoot shank to help provide a springboard of propulsion when called upon. These soles don't miss.